AGA1050 Flue Gas (UV) Analyzer
- Product name: AGA1050 UV gas analyzer Application range: Flue gas: SO2: 0-50ppm NO: 0-100ppm O2: 0-30% VOL
Mating products: pretreatment system, linkage system, cabinet Product introduction: AGA1050 series flue gas analyzer uses ultraviolet differential (DOAS) technology to directly measure the absorption spectrum of the measured gas.
- Consulting Hotline: 400-025-9821
The AGA1050 series flue gas analyzer uses ultraviolet differential (DOAS) technology to directly measure the absorption spectrum of the measured gas. Compared with the traditional infrared absorption principle, the AGA1050 has higher detection accuracy, with a minimum lower limit of 0.1 ppm, which is suitable for monitoring nitrogen oxides and sulfur dioxide emissions from flue gas emissions from thermal power emissions, waste incineration and other processes.
Measurement component: Flue gas: SO 2 : 0-50 ppm NO: 0-100 ppm
O 2 ： 0-30% VOL
Detection principle: UV differential DOAS, electrochemical (oxygen)
Error: ± 2% FS
Resolution: 1ppm / 0.1% VOL
Zero drift: ± 2% FS / 7d
Range drift: ± 2% FS / 7d
Response time: 45s / T90
Working temperature: 0 ℃ -40 ℃
Polarization time: ≤30min
1. Emissions monitoring of coal-fired power plants
4. Desulfurization and denitration process monitoring
2. Emissions monitoring of cement plants
5.Monitoring of waste incineration emissions
3. Monitoring of industrial furnace emissions
6.Monitoring of sulfur recovery and emissions
The AGA1050 analyzer is based on ultraviolet absorption spectroscopy technology and differential absorption spectroscopy algorithm (DOAS), which can measure the concentration of SO2 and NOX gases.
The analyzer consists of light source, gas chamber, optical fiber and spectrometer (including diaphragm, holographic grating, linear array detector) and other components. The ultraviolet light emitted by the light source enters the gas chamber through the optical window and is absorbed by the sample gas flowing through the gas chamber. The light carrying the absorption information of the sample gas is collected by the lens and coupled into the optical fiber. Processing, you can get the absorption spectrum of the gas. By performing differential analysis of the spectrum and combining chemometric algorithms, the concentration of relevant components in the gas can be obtained.
Direct measurement of gas absorption spectrum, no cross interference, high measurement accuracy, the lowest lower limit can reach 1ppm.
Spectral analysis technology, indirect measurement, not affected by moisture and dust.
Through continuous spectrum analysis, the concentration of multiple gas components can be measured simultaneously
Pulsed xenon light source requires no preheating and has a service life of up to 10 years.
Holographic grating beam splitting and array sensors with high stability.
High-transmittance optical glass, special custom-coated mirror, new light path design, more powerful performance.
Color touch screen display, concentration curve, historical data and other information display.
RS485 signal output, multiple switch output, can be matched with CEMS system.
The standard 4U chassis design can be easily installed in the cabinet.
Soft start and watchdog function, the program is stable and does not crash.
Product parameters see product parameter table
| 24-hour duty hotline |
| QQ |
| Fixed telephone |
025-66095359 / 87787361
| After-sales phone |
| mobile phone number |
| E-mail |
| Overseas Sales || email@example.com |
| fax || 025-87787362 |
| 13 # Liandong U Valley Kaiteng Industrial Park, Qingshuiting East Road, Jiangning District, Nanjing City, Jiangsu Province |
| We chat number |
Gas detection analyzer, dust detector, gas detection alarm, oxygen content analyzer, oxygen analyzer, oxygen analyzer
Inquiry: AGA1050 Flue Gas (UV) Analyzer